Forums

Hi all, how are you?, recently I've tried to open the help file for proteus 8.6 and it opens the help window but it didn't show the content of the file, I mean, the help window remains in white with no content.

 

The debbuger shows this message:

 

"STARTPAGE: Help link - PDS:0 from helpTopicsList" 
Could not load wine-gecko. HTML rendering will be disabled.
err:mshtml:HTMLDocument_Create Failed to init Gecko, returning CLASS_E_CLASSNOTAVAILABLE

 

How can I solve this problem?.

Edité par vra

I saw that this problem can be solved by installing wine-gecko but I'm trying to install from component install window in PoL but says that an error occured.

What information is needed in my post?

 

What information is needed in my post?

 

Quote from Dadu042

Hi, I have Linux Debian 9 64 bits, the message of the debugger is in the first message that I've posted. I have PlayOnLinux 4.3.4.

 

The computer is a core i3-3110M, 6 GB of RAM, graphics card intel 4000

And the wine version ?

 

> I saw that this problem can be solved by installing wine-gecko but I'm trying to
> install from component install window in PoL but says that an error occured.

 

I think this is the right way, if the error if there again, please report details here.

wine was updated to version 4.0,

 

the debugger shows all the following information about this session and the attempt to install gecko:

 

[07/20/19 10:08:18] - ----- Starting function POL_Install_gecko -----
[07/20/19 10:08:19] - Running wine- msiexec /i /home/valery/.PlayOnLinux//ressources/wine_gecko-1.3.0-x86.msi (Working directory : /home/valery/.PlayOnLinux/tmp)
[07/20/19 10:08:57] - Running wine- regedit /home/valery/.PlayOnLinux//tmp/geckopath.reg (Working directory : /home/valery/.PlayOnLinux/tmp)
[07/20/19 10:08:57] - Content of /home/valery/.PlayOnLinux//tmp/geckopath.reg
-----------
REGEDIT4

[HKEY_LOCAL_MACHINE\Software\Wine\MSHTML\1.3.0]
"GeckoPath"="c:\\windows\\system32\\gecko\\1.3.0\\wine_gecko\\"-----------
[07/20/19 10:08:57] - Running wine- regsvr32 mshtml (Working directory : /home/valery/.PlayOnLinux/tmp)
wine: Unhandled page fault on read access to 0x7faf7b80 at address 0x7fcb3b25 (thread 001c), starting debugger...
Could not load wine-gecko. HTML rendering will be disabled.
regsvr32: Successfully registered DLL 'mshtml'
[07/20/19 10:08:59] - ----- Ending function POL_Install_gecko -----
[07/20/19 10:09:04] - Running wine- PDS.EXE (Working directory : /home/valery/.PlayOnLinux/wineprefix/Proteus8.6/drive_c/Program Files/Labcenter Electronics/Proteus 8 Professional/BIN)

 

I'm trying to install from component install window in PoL but says that an error occured.

 

 

 

tellthebell

Edité par Matilda6154

Because I see:
wine: Unhandled page fault on read access to 0x7faf7b80 at address 0x7fcb3b25 (thread 001c), starting debugger...

 

I think the answer is : How to Read Debug Logs : Errors related to Wine.

Hi, sorry for all the months without a replay, I think I've updated the wine version to 4.0 in POL but when I request the wine version from the computer's terminal it says this

 

wine --version
wine-1.8.7 (Debian 1.8.7-2)

which means that I least the computer has an older version of wine, so, do I need to update wine from inside of POL of on the terminal?

 

Thanks for the help

 

I've searched and I made a mistake, I've nerver copied the gecko .msi files on the gecko folders, then I readed the instructive in the wine page and copied those files inside /usr/shar/wine/gecko but I had the same problem.

 

Then I also readed "if you installed Wine in some $prefix rather than /usr, place the .msi files in $prefix/share/wine/gecko/ instead of /usr/share/wine/gecko. (e.g. if you installed it from source, then place the files in /usr/local/share/wine/gecko)."

so then I copied the gecko .msi files in the folder /.PlayOnLinux/wine/gecko but it still gave me the same error "Could not load wine-gecko. HTML rendering will be disabled.", so, what can I do from here?

 

There's no /share folder inside the Proteus folder

Edité par vra

I've finally could solve the problem as explained below:

 

After uninsstalled the program when I was reinstalling then I modifed the wine machine configuration to emulate windows 10, bassically I was running a new application under windows XP and it solved the problem of showing the help.

 

May be you present problems when displaying the schematic but that can be solved by modifying the Display Options in the System Menu, for me worked use the windows GDI mode.

I am tired for trying installing Arduino library in Proteus 8.6 demonstration. Please help me kroger feedback.

 

I am tired for trying installing Arduino library in Proteus 8.6 demonstration. Please help me kroger feedback.

 

Quote from Olga32

Hi @Olga32, to install a library in proteus make the following steps:

 

1. Open any design, even a sample.
2. Open the library menu an then the submenu Library Manager.
3. Press the button "Create Library" which is fourth from left in the lower part of the window
4. The following steps are easy.

 

After that you could use the all the arduino circuits that you want to use in your simulations.

 

I need to clarify something, at least from proteus 8.6 it comes with arduino schematics pre-packed to use directly from inside the CAD. The only thing you must do previous to use and Arduino is to create a Project for Arduino, all that can be done with the Project Wizard, you even can write your code and compile it from inside the CAD with the embedded compiler for Arduino.

 

 

I am tired for trying installing Arduino library in Proteus 8.6 demonstration. Please help me kroger feedback.

 

Quote from Olga32

Hi @Olga32, to install a library in proteus make the following steps:

 

1. Open any design, even a sample.
2. Open the library menu an then the submenu Library Manager.
3. Press the button "Create Library" which is fourth from left in the lower part of the window
4. The following steps are easy.

 

After that you could use the all the arduino circuits that you want to use in your simulations.

 

I need to clarify something, at least from proteus 8.6 it comes with arduino schematics pre-packed to use directly from inside the CAD. The only thing you must do previous to use and Arduino is to create a Project for Arduino, all that can be done with the Project Wizard, you even can write your code and compile it from inside the CAD with the embedded compiler for Arduino.

 

Quote from vra

Hi vra, please how do I open "Library Manager" of playonlinux, I can't read any title, menue or fuction with this name

Selected my installed application on playonlinux main screen I just see on the left pannel the following options: run, close, debug, configure, create a shortcut, open the directory, uninstall

At the top function menu: file, display, tools, settings, plugins, support, help; but no one have any "Library Manager"

I appreciate your help in advance, regards

 

 

 

I am tired for trying installing Arduino library in Proteus 8.6 demonstration. Please help me kroger feedback.

 

Quote from Olga32

Hi @Olga32, to install a library in proteus make the following steps:

 

1. Open any design, even a sample.
2. Open the library menu an then the submenu Library Manager.
3. Press the button "Create Library" which is fourth from left in the lower part of the window
4. The following steps are easy.

 

After that you could use the all the arduino circuits that you want to use in your simulations.

 

I need to clarify something, at least from proteus 8.6 it comes with arduino schematics pre-packed to use directly from inside the CAD. The only thing you must do previous to use and Arduino is to create a Project for Arduino, all that can be done with the Project Wizard, you even can write your code and compile it from inside the CAD with the embedded compiler for Arduino.

 

Quote from vra

Hi vra, please how do I open "Library Manager" of playonlinux, I can't read any title, menue or fuction with this name

Selected my installed application on playonlinux main screen I just see on the left pannel the following options: run, close, debug, configure, create a shortcut, open the directory, uninstall

At the top function menu: file, display, tools, settings, plugins, support, help; but no one have any "Library Manager"

I appreciate your help in advance, regards

 

Quote from arturok

Hi @Arturok, to solve that display issue you nedd to go to menu System > Set Display Options and in the emergin menu you must choose "Use Windows GDI Graphics", that solved the display option for me. Any question ask again